Conveyor
Head Roller
(also described as Magnetic Pulleys)
Description: Magnetic Head Rollers
are positioned at the “head” of belt conveyors
to extract metal contamination from the product on the
belt. As the roller rotates, it holds the tramp metal
while clean product is discharged. Finally as the belt
leaves the roller, the magnetism dissipates, and the
unwanted contamination falls from under the belt into
a separate receptacle. This type of magnet acts as secondary
protection for deeply embedded metal in the product,
which may have not been initially extracted by an overhead
suspension magnet.
[See
case study]
Features
|
 |
Easily installed |
|
Self-cleaning action |
|
Continuous, permanent and power
free |
|
Available with high intensity
rare earth magnets |
This large rare earth magnetic head
roller 1320mm x 400mm dia
was supplied to a domestic waste recycling unit for the
separation of household
green waste. It was capable of holding sledge hammer heads
weighing 6.5kgs.
Specification
|
|
Manufactured to specification |
|
End shafts to your requirements |
|
All stainless steel construction |
|
Available with crowned face |
^ top
of page |
